S16008-1010

Delivery:

Payment:

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You’ll receive an order information email in your inbox. (Please remember to check the spam folder if you didn’t hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Technical Specifications: Female Threaded Rod End with Left-Hand Thread | Model S16008-1010

Parameter Category	Specification	Notes / Standard
Manufacturer Part Number	S16008-1010	The -1010 suffix strongly indicates a left-hand (LH) thread.
Bearing Type	Female Threaded, Standard Duty Spherical Plain Bearing / Rod End
Thread Designation	Female Thread (Internal Thread)
Key Design Feature	Left-Hand Thread (LH)	The thread is reversed. Turns counter-clockwise to tighten.
Thread Size	3/8″ – 24 UNF	This is a very common size for this suffix. Must be confirmed.
Thread Direction	Left-Hand (LH)	Critical distinguishing feature.
Inner Diameter (Bore of Outer Ring)	~0.500 inch (1/2″)	~12.7 mm	Approximate bore size of the housing. Similar to -66 size.
Outer Diameter (O.D.)	~0.9375 inch (15/16″)	~23.81 mm
Width	~0.750 inch (3/4″)	~19.05 mm	Overall thickness.
Bearing Housing Material	Carbon Steel / Case Hardened	Often corrosion-resistant plated.
Liner Material	Self-Lubricating Composite (e.g., PTFE/Nomex) OR Porous Bronze	Can be either. Defined by the presence of a grease fitting.
Ball Material	Case Hardened Carbon Steel
Static Load Capacity	~8,000 – 10,000 lbf (~36 – 44 kN)	Value is approximate; same as right-hand version of similar size.
Dynamic Load Capacity	~4,000 – 5,000 lbf (~18 – 22 kN)	Value is approximate.
Lubrication	Varies: Maintenance-Free (PTFE) or Lubricatable (Bronze).	Defined by the presence of a grease fitting.
Primary Applications	Used in assemblies where prevention of unintended loosening is critical. Commonly used in pairs with right-hand threaded rod ends on a turnbuckle for adjusting tension, length, or alignment in linkages, cables, and push-pull systems. Also used in rotating assemblies where normal rotation would loosen a standard thread.