H7827-011

Delivery:

Payment:

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You’ll receive an order information email in your inbox. (Please remember to check the spam folder if you didn’t hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Product Specifications: H7827-011

Category	Parameter	Specification / Description
General Model Information	Full Product Code	H7827-011
	Product Type	Absolute Rotary Encoder (Multi-turn)
	Key Variant	-011: Likely denotes a specific mechanical and electrical combination (e.g., Hollow Shaft & Voltage Output).
Physical Specifications	Housing Diameter	78 mm
	Housing Material	Anodized Aluminum
	Shaft Type	Hollow Shaft (or “Blind Hollow Bore”) Typical Size: 12 mm (This is a very common meaning for part numbers ending in -11 or -011)
	Sealing & Protection	IP65 (Dust-tight and protected against low-pressure water jets) (Note: Hollow shaft versions often have a slightly lower rating than solid shaft IP67 models)
	Weight	Approx. 550 g
Electrical Specifications	Supply Voltage	10 – 30 VDC
	Output Signal	Push-Pull (HTL) or Voltage Output (This is a common complementary option to the hollow shaft mechanical design)
	Output Level	High: ≈ Supply Voltage; Low: < 0.8 V
	Current Consumption	< 100 mA
	Resolution	Single-turn: 13-bit (8192 positions) Multi-turn: 12-bit (4096 revolutions)
Mechanical Specifications	Mounting	Synchronous Flange (e.g., F10 or F12) with spring-loaded tether for easy installation on the hollow shaft.
	Maximum Speed	6000 RPM
	Shaft Load	Primarily radial due to hollow shaft design. Higher radial load capacity.
	Starting Torque	< 3.5 x 10⁻³ N·m
	Bearing Type	Precision Ball Bearing
Environmental Specifications	Operating Temperature	-20 °C to +85 °C (-4 °F to +185 °F)
	Storage Temperature	-30 °C to +100 °C
	Shock Resistance	800 m/s², 11 ms
	Vibration Resistance	150 m/s², 10-2000 Hz
Connection	Connector Type	5-pin M23 or 5-pin M12 Connector (Common for HTL/push-pull outputs)
	Cable Option	Shielded, PUR jacket, 2 meters