H13229-210

Delivery:

Payment:

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You’ll receive an order information email in your inbox. (Please remember to check the spam folder if you didn’t hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Product Specifications: H13229-210

Category	Parameter	Specification / Description
General	Model Number	H13229-210
	Product Type	High-Performance High-Pressure Transmitter
	Series	H13200 Series
	Overall Function	Precise measurement of very high pressure with an amplified, stable output signal. Designed for severe service applications.
Performance	Pressure Range	0 … 210 bar (Most Common) Other equivalent ranges: 0…21.0 MPa, 0…21000 kPa, ~0…3045 psi
	Full Scale (F.S.)	210 bar
	Accuracy	±0.25% F.S. (Excellent for this high range)
	Non-Linearity, Hysteresis, Repeatability	±0.2% F.S.
	Long-Term Stability	< ±0.1% F.S. per year
	Proof Pressure	1.5 x F.S. (315 bar)
	Burst Pressure	2.5 to 3 x F.S. (525 – 630 bar)
	Operating Temperature	-20°C to +85°C
	Thermal Effect Zero	±0.02% F.S. per °C
	Thermal Effect Span	±0.02% F.S. per °C
Electrical	Supply Voltage	12 to 30 VDC (24 VDC typical)
	Output Signal	4-20 mA (2-wire)
	Load Capacity	(4-20mA) ≤ (Vs – 10V) / 0.02A
	Response Time	< 5 ms
	Connection	M12 4-pin connector (or high-pressure rated conduit gland)
	Electrical Protection	Reverse polarity, over-voltage, and short-circuit protection.
Mechanical	Pressure Port	High-Pressure Thread (e.g., G1/2″ or M20x1.5 Male). Larger and stronger than lower-range models.
	Wetted Materials	316L Stainless Steel diaphragm, 17-4PH SS housing, FKM (Viton) O-rings
	Housing Material	316 Stainless Steel
	Ingress Protection	IP67 (Protected against temporary immersion)
	Weight	Approximately 450 g (heavier due to robust construction)
Media & Environment	Media Compatible	Hydraulic Oil, Water-Glycol, HFA/HFB Fluids, Water (compatible with wetted materials)
	Media Temperature	-20°C to +85°C
	Storage Temperature	-40°C to +100°C
	Compliance	CE, RoHS, REACH.