H12056P-40

Delivery:

Payment:

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You’ll receive an order information email in your inbox. (Please remember to check the spam folder if you didn’t hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Product Specifications: H12056P-40

Category	Parameter	Specification / Description
General	Model Number	H12056P-40
	Product Type	Industrial Pressure Transducer / Transmitter
	Series	H12000 Series
	Overall Function	Medium-Pressure measurement with a proportional 4-20mA output. Features a plastic barbed port for tubing.
Performance	Pressure Range	0 … 40 bar (Most Common) Other equivalent ranges: 0…4.0 MPa, 0…4000 kPa, ~0…580 psi
	Full Scale (F.S.)	40 bar
	Accuracy	±0.5% Full Scale (typical)
	Non-Linearity & Hysteresis	±0.3% F.S.
	Long-Term Stability	< ±0.1% F.S. per year
	Proof Pressure	1.5 x F.S. (60 bar)
	Burst Pressure	3 x F.S. (120 bar)
	Operating Temperature	-20°C to +85°C
	Thermal Effect	±0.02% F.S. per °C
Electrical	Supply Voltage	12 to 30 VDC (Typical 24 VDC)
	Output Signal	4-20 mA (2-wire loop powered)
	Load Capacity	≤ (Vs – 10V) / 0.02A Example: 500 Ω max at 24 VDC
	Zero & Span Adjust	Fixed internal laser trim
	Connection	Integrated 2-meter cable with stripped and tinned leads. Alternative: M12 4-pin connector
	Electrical Protection	Reverse polarity protected, short-circuit protected.
Mechanical	Pressure Port	“P” = Plastic (Polyamide) Barbed Port For use with ¼” (6mm) or 8mm ID tubing.
	Wetted Materials	316L Stainless Steel diaphragm, FKM (Viton) O-rings
	Housing Material	Stainless Steel
	Ingress Protection	IP65 (Dust tight, protected against low-pressure water jets)
	Weight	Approximately 200 g
Media & Environment	Media Compatible	Air, Water, Hydraulic Oil, Light Fuels (non-corrosive, compatible with 316L SS & FKM)
	Media Temperature	-20°C to +85°C
	Storage Temperature	-40°C to +100°C
	Compliance	CE Marked, RoHS Compliant