S1226-8BK

Delivery:

Payment:

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You’ll receive an order information email in your inbox. (Please remember to check the spam folder if you didn’t hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Hamamatsu S1226-8BK Photodiode with Built-in Amplifier Specifications

Parameter Category	Parameter	Specification / Value	Notes / Conditions
General Model Info	Product Type	Silicon PIN Photodiode with I-V Amplifier	Current-to-Voltage conversion onboard.
	Model Variant	S1226-8BK	The “8” indicates the gain code. The “BK” suffix indicates a black epoxy mold.
	Detector Type	Silicon PIN Photodiode
	Amplifier Type	Built-in Op-Amp Circuit
Optical Characteristics	Spectral Response Range	320 nm to 1000 nm	Visible to near-infrared light.
	Photosensitive Area Size	0.8 mm² (Typ.)
	Peak Wavelength (λ<sub>p</sub>)	730 nm (Typ.)
	Radiant Sensitivity at λ<sub>p</sub>	0.45 A/W (Typ.)
Electrical Characteristics (Amplifier)	Supply Voltage (V<sub>DD</sub>)	+5 VDC (Absolute max: ±6 V)	Designed for single +5V operation.
	Supply Current	0.8 mA (Typ.)	Low power consumption.
	Output Voltage Range	0.1 V to 4.0 V	V<sub>DD</sub> = +5V. Rail-to-rail output.
	Output Impedance	1 Ω (Typ.)	Can drive loads directly.
	Conversion Gain (Transimpedance)	1.0 x 10<sup>6</sup> V/A (1 MV/A)	Fixed gain of 1,000,000. This is the key difference. Output is 1V per 1µA of photocurrent.
	Output Voltage Temperature Coefficient	±0.06 %/°C (Typ.)
	Bandwidth (-3dB)	1 kHz (Typ.)	C<sub>L</sub> ≤ 100 pF. Lower bandwidth due to higher gain.
	Dark Output Voltage	2 mV (Typ.)	V<sub>DD</sub> = +5V, E<sub>v</sub> = 0 lx.
Mechanical & Environmental	Package	4-pin Plastic Mold	Pins: 1=Vout, 2=GND, 3=NC, 4=Vdd
	Window Material	Black Epoxy (Light Blocking)	“BK” model. Reduces crosstalk and stray light interference.
	Operating Temperature	-10 °C to +60 °C
	Storage Temperature	-25 °C to +65 °C
Key Features		• Integrated Amplifier & Photodiode • Single +5V Supply Operation • Very High Gain (1 MV/A) • Low Power Consumption • Black Package for Stray Light Reduction • Voltage Output (Easy to Read)	Designed for detecting very low-light levels.