G12182-010K

Delivery:

Payment:

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You’ll receive an order information email in your inbox. (Please remember to check the spam folder if you didn’t hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

G12182-010K Common Mode Choke – Parameter Table

Parameter Category	Parameter	Symbol	Value / Rating	Conditions / Notes
General Specifications	Part Number	–	G12182-010K	–
	Type	–	Common Mode Choke	Data Line Filter
	Inductance (Common Mode)	L<sub>CM</sub>	1.0 µH (1000 nH)	±10%	Typically measured at 100 MHz, 0.25 V<sub>rms</sub>
	Rated Current	I<sub>R</sub>	2.0 A	–
	Operating Temperature Range	T<sub>op</sub>	-40 °C to +85 °C	–
	Storage Temperature Range	T<sub>stg</sub>	-40 °C to +85 °C	–
Electrical Characteristics	DC Resistance (Max. per Line)	R<sub>DC</sub>	0.05 Ω	Typical value is lower
	Impedance (Common Mode)	Z	200 Ω (Min)	Measured at 100 MHz (Typical)
	Self-Resonant Frequency	SRF	> 60 MHz (Typ.)	Very high, often up to several hundred MHz.
	Rated Voltage	V<sub>R</sub>	50 V<sub>DC</sub>	–
	Withstanding Voltage	V<sub>ISO</sub>	100 V<sub>AC</sub>	For 1 minute, between coil and core
Isolation & Safety	Insulation Resistance	R<sub>ISO</sub>	≥ 100 MΩ	Measured at 100 V<sub>DC</sub>
Mechanical Characteristics	Pin Count / Configuration	–	4 pins	In-line, 2×2
	Pin Spacing (Pitch)	–	2.54 mm (0.1 inch)	Standard DIP spacing
	Case Material	–	Ferrite Core, Plastic Case	–
	Mounting Type	–	Through-Hole (DIP)	–
	Flammability Rating	–	UL 94V-0	–
Applications	Typical Use	–	EMI Suppression on High-Speed Data Lines	USB 3.0/3.1, HDMI, Gigabit Ethernet, DisplayPort, MIPI